+++ /dev/null
-#!/usr/bin/perl -w
-##############################################################################
-## sendEmail
-## Written by: Brandon Zehm <caspian@dotconf.net>
-##
-## License:
-## sendEmail (hereafter referred to as "program") is free software;
-## you can redistribute it and/or modify it under the terms of the GNU General
-## Public License as published by the Free Software Foundation; either version
-## 2 of the License, or (at your option) any later version.
-## When redistributing modified versions of this source code it is recommended
-## that that this disclaimer and the above coder's names are included in the
-## modified code.
-##
-## Disclaimer:
-## This program is provided with no warranty of any kind, either expressed or
-## implied. It is the responsibility of the user (you) to fully research and
-## comprehend the usage of this program. As with any tool, it can be misused,
-## either intentionally (you're a vandal) or unintentionally (you're a moron).
-## THE AUTHOR(S) IS(ARE) NOT RESPONSIBLE FOR ANYTHING YOU DO WITH THIS PROGRAM
-## or anything that happens because of your use (or misuse) of this program,
-## including but not limited to anything you, your lawyers, or anyone else
-## can dream up. And now, a relevant quote directly from the GPL:
-##
-## NO WARRANTY
-##
-## 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-## FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
-## OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-## PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-## OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-## MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
-## TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
-## PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-## REPAIR OR CORRECTION.
-##
-##############################################################################
-use strict;
-use IO::Socket;
-
-
-########################
-## Global Variables ##
-########################
-
-my %conf = (
- ## General
- "programName" => $0, ## The name of this program
- "version" => '1.56', ## The version of this program
- "authorName" => 'Brandon Zehm', ## Author's Name
- "authorEmail" => 'caspian@dotconf.net', ## Author's Email Address
- "timezone" => '+0000', ## We always use +0000 for the time zone
- "hostname" => 'changeme', ## Used in printmsg() for all output (is updated later in the script).
- "debug" => 0, ## Default debug level
- "error" => '', ## Error messages will often be stored here
-
- ## Logging
- "stdout" => 1,
- "logging" => 0, ## If this is true the printmsg function prints to the log file
- "logFile" => '', ## If this is specified (form the command line via -l) this file will be used for logging.
-
- ## Network
- "server" => 'localhost', ## Default SMTP server
- "port" => 25, ## Default port
- "bindaddr" => '', ## Default local bind address
- "alarm" => '', ## Default timeout for connects and reads, this gets set from $opt{'timeout'}
- "tls_client" => 0, ## If TLS is supported by the client (us)
- "tls_server" => 0, ## If TLS is supported by the remote SMTP server
-
- ## Email
- "delimiter" => "----MIME delimiter for sendEmail-" ## MIME Delimiter
- . rand(1000000), ## Add some randomness to the delimiter
- "Message-ID" => rand(1000000) . "-sendEmail", ## Message-ID for email header
-
-);
-
-
-## This hash stores the options passed on the command line via the -o option.
-my %opt = (
- ## Addressing
- "reply-to" => '', ## Reply-To field
-
- ## Message
- "message-file" => '', ## File to read message body from
- "message-header" => '', ## Additional email header line(s)
- "message-format" => 'normal', ## If "raw" is specified the message is sent unmodified
- "message-charset" => 'iso-8859-1', ## Message character-set
- "message-content-type" => 'auto', ## auto, text, html or an actual string to put into the content-type header.
-
- ## Network
- "timeout" => 60, ## Default timeout for connects and reads, this is copied to $conf{'alarm'} later.
- "fqdn" => 'changeme', ## FQDN of this machine, used during SMTP communication (is updated later in the script).
-
- ## eSMTP
- "username" => '', ## Username used in SMTP Auth
- "password" => '', ## Password used in SMTP Auth
- "tls" => 'auto', ## Enable or disable TLS support. Options: auto, yes, no
-
-);
-
-## More variables used later in the program
-my $SERVER;
-my $CRLF = "\015\012";
-my $subject = '';
-my $header = '';
-my $message = '';
-my $from = '';
-my @to = ();
-my @cc = ();
-my @bcc = ();
-my @attachments = ();
-my @attachments_names = ();
-
-## For printing colors to the console
-my ${colorRed} = "\033[31;1m";
-my ${colorGreen} = "\033[32;1m";
-my ${colorCyan} = "\033[36;1m";
-my ${colorWhite} = "\033[37;1m";
-my ${colorNormal} = "\033[m";
-my ${colorBold} = "\033[1m";
-my ${colorNoBold} = "\033[0m";
-
-## Don't use shell escape codes on Windows systems
-if ($^O =~ /win/i) {
- ${colorRed} = ${colorGreen} = ${colorCyan} = ${colorWhite} = ${colorNormal} = ${colorBold} = ${colorNoBold} = "";
-}
-
-## Load IO::Socket::SSL if it's available
-eval { require IO::Socket::SSL; };
-if ($@) { $conf{'tls_client'} = 0; }
-else { $conf{'tls_client'} = 1; }
-
-
-
-
-
-
-#############################
-## ##
-## FUNCTIONS ##
-## ##
-#############################
-
-
-
-
-
-###############################################################################################
-## Function: initialize ()
-##
-## Does all the script startup jibberish.
-##
-###############################################################################################
-sub initialize {
-
- ## Set STDOUT to flush immediatly after each print
- $| = 1;
-
- ## Intercept signals
- $SIG{'QUIT'} = sub { quit("EXITING: Received SIG$_[0]", 1); };
- $SIG{'INT'} = sub { quit("EXITING: Received SIG$_[0]", 1); };
- $SIG{'KILL'} = sub { quit("EXITING: Received SIG$_[0]", 1); };
- $SIG{'TERM'} = sub { quit("EXITING: Received SIG$_[0]", 1); };
-
- ## ALARM and HUP signals are not supported in Win32
- unless ($^O =~ /win/i) {
- $SIG{'HUP'} = sub { quit("EXITING: Received SIG$_[0]", 1); };
- $SIG{'ALRM'} = sub { quit("EXITING: Received SIG$_[0]", 1); };
- }
-
- ## Fixup $conf{'programName'}
- $conf{'programName'} =~ s/(.)*[\/,\\]//;
- $0 = $conf{'programName'} . " " . join(" ", @ARGV);
-
- ## Fixup $conf{'hostname'} and $opt{'fqdn'}
- if ($opt{'fqdn'} eq 'changeme') { $opt{'fqdn'} = get_hostname(1); }
- if ($conf{'hostname'} eq 'changeme') { $conf{'hostname'} = $opt{'fqdn'}; $conf{'hostname'} =~ s/\..*//; }
-
- return(1);
-}
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-###############################################################################################
-## Function: processCommandLine ()
-##
-## Processes command line storing important data in global vars (usually %conf)
-##
-###############################################################################################
-sub processCommandLine {
-
-
- ############################
- ## Process command line ##
- ############################
-
- my @ARGS = @ARGV; ## This is so later we can re-parse the command line args later if we need to
- my $numargv = @ARGS;
- help() unless ($numargv);
- my $counter = 0;
-
- for ($counter = 0; $counter < $numargv; $counter++) {
-
- if ($ARGS[$counter] =~ /^-h$/i) { ## Help ##
- help();
- }
-
- elsif ($ARGS[$counter] eq "") { ## Ignore null arguments
- ## Do nothing
- }
-
- elsif ($ARGS[$counter] =~ /^--help/) { ## Topical Help ##
- $counter++;
- if ($ARGS[$counter] && $ARGS[$counter] !~ /^-/) {
- helpTopic($ARGS[$counter]);
- }
- else {
- help();
- }
- }
-
- elsif ($ARGS[$counter] =~ /^-o$/i) { ## Options specified with -o ##
- $counter++;
- ## Loop through each option passed after the -o
- while ($ARGS[$counter] && $ARGS[$counter] !~ /^-/) {
-
- if ($ARGS[$counter] !~ /(\S+)=(\S.*)/) {
- printmsg("WARNING => Name/Value pair [$ARGS[$counter]] is not properly formatted", 0);
- printmsg("WARNING => Arguments proceeding -o should be in the form of \"name=value\"", 0);
- }
- else {
- if (exists($opt{$1})) {
- if ($1 eq 'message-header') {
- $opt{$1} .= $2 . $CRLF;
- }
- else {
- $opt{$1} = $2;
- }
- printmsg("DEBUG => Assigned \$opt{} key/value: $1 => $2", 3);
- }
- else {
- printmsg("WARNING => Name/Value pair [$ARGS[$counter]] will be ignored: unknown key [$1]", 0);
- printmsg("HINT => Try the --help option to find valid command line arguments", 1);
- }
- }
- $counter++;
- } $counter--;
- }
-
- elsif ($ARGS[$counter] =~ /^-f$/) { ## From ##
- $counter++;
- if ($ARGS[$counter] && $ARGS[$counter] !~ /^-/) { $from = $ARGS[$counter]; }
- else { printmsg("WARNING => The argument after -f was not an email address!", 0); $counter--; }
- }
-
- elsif ($ARGS[$counter] =~ /^-t$/) { ## To ##
- $counter++;
- while ($ARGS[$counter] && ($ARGS[$counter] !~ /^-/)) {
- if ($ARGS[$counter] =~ /[;,]/) {
- push (@to, split(/[;,]/, $ARGS[$counter]));
- }
- else {
- push (@to,$ARGS[$counter]);
- }
- $counter++;
- } $counter--;
- }
-
- elsif ($ARGS[$counter] =~ /^-cc$/) { ## Cc ##
- $counter++;
- while ($ARGS[$counter] && ($ARGS[$counter] !~ /^-/)) {
- if ($ARGS[$counter] =~ /[;,]/) {
- push (@cc, split(/[;,]/, $ARGS[$counter]));
- }
- else {
- push (@cc,$ARGS[$counter]);
- }
- $counter++;
- } $counter--;
- }
-
- elsif ($ARGS[$counter] =~ /^-bcc$/) { ## Bcc ##
- $counter++;
- while ($ARGS[$counter] && ($ARGS[$counter] !~ /^-/)) {
- if ($ARGS[$counter] =~ /[;,]/) {
- push (@bcc, split(/[;,]/, $ARGS[$counter]));
- }
- else {
- push (@bcc,$ARGS[$counter]);
- }
- $counter++;
- } $counter--;
- }
-
- elsif ($ARGS[$counter] =~ /^-m$/) { ## Message ##
- $counter++;
- $message = "";
- while ($ARGS[$counter] && $ARGS[$counter] !~ /^-/) {
- if ($message) { $message .= " "; }
- $message .= $ARGS[$counter];
- $counter++;
- } $counter--;
-
- ## Replace '\n' with $CRLF.
- ## This allows newlines with messages sent on the command line
- $message =~ s/\\n/$CRLF/g;
- }
-
- elsif ($ARGS[$counter] =~ /^-u$/) { ## Subject ##
- $counter++;
- $subject = "";
- while ($ARGS[$counter] && $ARGS[$counter] !~ /^-/) {
- if ($subject) { $subject .= " "; }
- $subject .= $ARGS[$counter];
- $counter++;
- } $counter--;
- }
-
- elsif ($ARGS[$counter] =~ /^-s$/) { ## Server ##
- $counter++;
- if ($ARGS[$counter] && $ARGS[$counter] !~ /^-/) {
- $conf{'server'} = $ARGS[$counter];
- if ($conf{'server'} =~ /:/) { ## Port ##
- ($conf{'server'},$conf{'port'}) = split(":",$conf{'server'});
- }
- }
- else { printmsg("WARNING - The argument after -s was not the server!", 0); $counter--; }
- }
-
- elsif ($ARGS[$counter] =~ /^-b$/) { ## Bind Address ##
- $counter++;
- if ($ARGS[$counter] && $ARGS[$counter] !~ /^-/) {
- $conf{'bindaddr'} = $ARGS[$counter];
- }
- else { printmsg("WARNING - The argument after -b was not the bindaddr!", 0); $counter--; }
- }
-
- elsif ($ARGS[$counter] =~ /^-a$/) { ## Attachments ##
- $counter++;
- while ($ARGS[$counter] && ($ARGS[$counter] !~ /^-/)) {
- push (@attachments,$ARGS[$counter]);
- $counter++;
- } $counter--;
- }
-
- elsif ($ARGS[$counter] =~ /^-xu$/) { ## AuthSMTP Username ##
- $counter++;
- if ($ARGS[$counter] && $ARGS[$counter] !~ /^-/) {
- $opt{'username'} = $ARGS[$counter];
- }
- else {
- printmsg("WARNING => The argument after -xu was not valid username!", 0);
- $counter--;
- }
- }
-
- elsif ($ARGS[$counter] =~ /^-xp$/) { ## AuthSMTP Password ##
- $counter++;
- if ($ARGS[$counter] && $ARGS[$counter] !~ /^-/) {
- $opt{'password'} = $ARGS[$counter];
- }
- else {
- printmsg("WARNING => The argument after -xp was not valid password!", 0);
- $counter--;
- }
- }
-
- elsif ($ARGS[$counter] =~ /^-l$/) { ## Logging ##
- $counter++;
- $conf{'logging'} = 1;
- if ($ARGS[$counter] && $ARGS[$counter] !~ /^-/) { $conf{'logFile'} = $ARGS[$counter]; }
- else { printmsg("WARNING - The argument after -l was not the log file!", 0); $counter--; }
- }
-
- elsif ($ARGS[$counter] =~ s/^-v+//i) { ## Verbosity ##
- my $tmp = (length($&) - 1);
- $conf{'debug'} += $tmp;
- }
-
- elsif ($ARGS[$counter] =~ /^-q$/) { ## Quiet ##
- $conf{'stdout'} = 0;
- }
-
- else {
- printmsg("Error: \"$ARGS[$counter]\" is not a recognized option!", 0);
- help();
- }
-
- }
-
-
-
-
-
-
-
-
- ###################################################
- ## Verify required variables are set correctly ##
- ###################################################
-
- ## Make sure we have something in $conf{hostname} and $opt{fqdn}
- if ($opt{'fqdn'} =~ /\./) {
- $conf{'hostname'} = $opt{'fqdn'};
- $conf{'hostname'} =~ s/\..*//;
- }
-
- if (!$conf{'server'}) { $conf{'server'} = 'localhost'; }
- if (!$conf{'port'}) { $conf{'port'} = 25; }
- if (!$from) {
- quit("ERROR => You must specify a 'from' field! Try --help.", 1);
- }
- if ( ((scalar(@to)) + (scalar(@cc)) + (scalar(@bcc))) <= 0) {
- quit("ERROR => You must specify at least one recipient via -t, -cc, or -bcc", 1);
- }
-
- ## Make sure email addresses look OK.
- foreach my $addr (@to, @cc, @bcc, $from, $opt{'reply-to'}) {
- if ($addr) {
- if (!returnAddressParts($addr)) {
- printmsg("ERROR => Can't use improperly formatted email address: $addr", 0);
- printmsg("HINT => Try viewing the extended help on addressing with \"--help addressing\"", 1);
- quit("", 1);
- }
- }
- }
-
- ## Make sure all attachments exist.
- foreach my $file (@attachments) {
- if ( (! -f $file) or (! -r $file) ) {
- printmsg("ERROR => The attachment [$file] doesn't exist!", 0);
- printmsg("HINT => Try specifying the full path to the file or reading extended help with \"--help message\"", 1);
- quit("", 1);
- }
- }
-
- if ($conf{'logging'} and (!$conf{'logFile'})) {
- quit("ERROR => You used -l to enable logging but didn't specify a log file!", 1);
- }
-
- if ( $opt{'username'} ) {
- if (!$opt{'password'}) {
- ## Prompt for a password since one wasn't specified with the -xp option.
- $SIG{'ALRM'} = sub { quit("ERROR => Timeout waiting for password inpupt", 1); };
- alarm(60) if ($^O !~ /win/i); ## alarm() doesn't work in win32
- print "Password: ";
- $opt{'password'} = <STDIN>; chomp $opt{'password'};
- if (!$opt{'password'}) {
- quit("ERROR => A username for SMTP authentication was specified, but no password!", 1);
- }
- }
- }
-
- ## Validate the TLS setting
- $opt{'tls'} = lc($opt{'tls'});
- if ($opt{'tls'} !~ /^(auto|yes|no)$/) {
- quit("ERROR => Invalid TLS setting ($opt{'tls'}). Must be one of auto, yes, or no.", 1);
- }
-
- ## If TLS is set to "yes", make sure sendEmail loaded the libraries needed.
- if ($opt{'tls'} eq 'yes' and $conf{'tls_client'} == 0) {
- quit("ERROR => No TLS support! SendEmail can't load required libraries. (try installing Net::SSLeay and IO::Socket::SSL)", 1);
- }
-
- ## Return 0 errors
- return(0);
-}
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-## getline($socketRef)
-sub getline {
- my ($socketRef) = @_;
- local ($/) = "\r\n";
- return $$socketRef->getline;
-}
-
-
-
-
-## Receive a (multiline?) SMTP response from ($socketRef)
-sub getResponse {
- my ($socketRef) = @_;
- my ($tmp, $reply);
- local ($/) = "\r\n";
- return undef unless defined($tmp = getline($socketRef));
- return("getResponse() socket is not open") unless ($$socketRef->opened);
- ## Keep reading lines if it's a multi-line response
- while ($tmp =~ /^\d{3}-/o) {
- $reply .= $tmp;
- return undef unless defined($tmp = getline($socketRef));
- }
- $reply .= $tmp;
- $reply =~ s/\r?\n$//o;
- return $reply;
-}
-
-
-
-
-###############################################################################################
-## Function: SMTPchat ( [string $command] )
-##
-## Description: Sends $command to the SMTP server (on SERVER) and awaits a successful
-## reply form the server. If the server returns an error, or does not reply
-## within $conf{'alarm'} seconds an error is generated.
-## NOTE: $command is optional, if no command is specified then nothing will
-## be sent to the server, but a valid response is still required from the server.
-##
-## Input: [$command] A (optional) valid SMTP command (ex. "HELO")
-##
-##
-## Output: Returns zero on success, or non-zero on error.
-## Error messages will be stored in $conf{'error'}
-## A copy of the last SMTP response is stored in the global variable
-## $conf{'SMTPchat_response'}
-##
-##
-## Example: SMTPchat ("HELO mail.isp.net");
-###############################################################################################
-sub SMTPchat {
- my ($command) = @_;
-
- printmsg("INFO => Sending: \t$command", 1) if ($command);
-
- ## Send our command
- print $SERVER "$command$CRLF" if ($command);
-
- ## Read a response from the server
- $SIG{'ALRM'} = sub { $conf{'error'} = "alarm"; $SERVER->close(); };
- alarm($conf{'alarm'}) if ($^O !~ /win/i); ## alarm() doesn't work in win32;
- my $result = $conf{'SMTPchat_response'} = getResponse(\$SERVER);
- alarm(0) if ($^O !~ /win/i); ## alarm() doesn't work in win32;
-
- ## Generate an alert if we timed out
- if ($conf{'error'} eq "alarm") {
- $conf{'error'} = "ERROR => Timeout while reading from $conf{'server'}:$conf{'port'} There was no response after $conf{'alarm'} seconds.";
- return(1);
- }
-
- ## Make sure the server actually responded
- if (!$result) {
- $conf{'error'} = "ERROR => $conf{'server'}:$conf{'port'} returned a zero byte response to our query.";
- return(2);
- }
-
- ## Validate the response
- if (evalSMTPresponse($result)) {
- ## conf{'error'} will already be set here
- return(2);
- }
-
- ## Print the success messsage
- printmsg($conf{'error'}, 1);
-
- ## Return Success
- return(0);
-}
-
-
-
-
-
-
-
-
-
-
-
-
-###############################################################################################
-## Function: evalSMTPresponse (string $message )
-##
-## Description: Searches $message for either an SMTP success or error code, and returns
-## 0 on success, and the actual error code on error.
-##
-##
-## Input: $message Data received from a SMTP server (ex. "220
-##
-##
-## Output: Returns zero on success, or non-zero on error.
-## Error messages will be stored in $conf{'error'}
-##
-##
-## Example: SMTPchat ("HELO mail.isp.net");
-###############################################################################################
-sub evalSMTPresponse {
- my ($message) = @_;
-
- ## Validate input
- if (!$message) {
- $conf{'error'} = "ERROR => No message was passed to evalSMTPresponse(). What happened?";
- return(1)
- }
-
- printmsg("DEBUG => evalSMTPresponse() - Checking for SMTP success or error status in the message: $message ", 3);
-
- ## Look for a SMTP success code
- if ($message =~ /^([23]\d\d)/) {
- printmsg("DEBUG => evalSMTPresponse() - Found SMTP success code: $1", 2);
- $conf{'error'} = "SUCCESS => Received: \t$message";
- return(0);
- }
-
- ## Look for a SMTP error code
- if ($message =~ /^([45]\d\d)/) {
- printmsg("DEBUG => evalSMTPresponse() - Found SMTP error code: $1", 2);
- $conf{'error'} = "ERROR => Received: \t$message";
- return($1);
- }
-
- ## If no SMTP codes were found return an error of 1
- $conf{'error'} = "ERROR => Received a message with no success or error code. The message received was: $message";
- return(2);
-
-}
-
-
-
-
-
-
-
-
-
-
-#########################################################
-# SUB: &return_month(0,1,etc)
-# returns the name of the month that corrosponds
-# with the number. returns 0 on error.
-#########################################################
-sub return_month {
- my $x = $_[0];
- if ($x == 0) { return 'Jan'; }
- if ($x == 1) { return 'Feb'; }
- if ($x == 2) { return 'Mar'; }
- if ($x == 3) { return 'Apr'; }
- if ($x == 4) { return 'May'; }
- if ($x == 5) { return 'Jun'; }
- if ($x == 6) { return 'Jul'; }
- if ($x == 7) { return 'Aug'; }
- if ($x == 8) { return 'Sep'; }
- if ($x == 9) { return 'Oct'; }
- if ($x == 10) { return 'Nov'; }
- if ($x == 11) { return 'Dec'; }
- return (0);
-}
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-#########################################################
-# SUB: &return_day(0,1,etc)
-# returns the name of the day that corrosponds
-# with the number. returns 0 on error.
-#########################################################
-sub return_day {
- my $x = $_[0];
- if ($x == 0) { return 'Sun'; }
- if ($x == 1) { return 'Mon'; }
- if ($x == 2) { return 'Tue'; }
- if ($x == 3) { return 'Wed'; }
- if ($x == 4) { return 'Thu'; }
- if ($x == 5) { return 'Fri'; }
- if ($x == 6) { return 'Sat'; }
- return (0);
-}
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-###############################################################################################
-## Function: returnAddressParts(string $address)
-##
-## Description: Returns a two element array containing the "Name" and "Address" parts of
-## an email address.
-##
-## Example: "Brandon Zehm <caspian@dotconf.net>"
-## would return: ("Brandon Zehm", "caspian@dotconf.net");
-##
-## "caspian@dotconf.net"
-## would return: ("caspian@dotconf.net", "caspian@dotconf.net")
-###############################################################################################
-sub returnAddressParts {
- my $input = $_[0];
- my $name = "";
- my $address = "";
-
- ## Make sure to fail if it looks totally invalid
- if ($input !~ /(\S+\@\S+)/) {
- $conf{'error'} = "ERROR => The address [$input] doesn't look like a valid email address, ignoring it";
- return(undef());
- }
-
- ## Check 1, should find addresses like: "Brandon Zehm <caspian@dotconf.net>"
- elsif ($input =~ /^\s*(\S(.*\S)?)\s*<(\S+\@\S+)>/o) {
- ($name, $address) = ($1, $3);
- }
-
- ## Otherwise if that failed, just get the address: <caspian@dotconf.net>
- elsif ($input =~ /<(\S+\@\S+)>/o) {
- $name = $address = $1;
- }
-
- ## Or maybe it was formatted this way: caspian@dotconf.net
- elsif ($input =~ /(\S+\@\S+)/o) {
- $name = $address = $1;
- }
-
- ## Something stupid happened, just return an error.
- unless ($name and $address) {
- printmsg("ERROR => Couldn't parse the address: $input", 0);
- printmsg("HINT => If you think this should work, consider reporting this as a bug to $conf{'authorEmail'}", 1);
- return(undef());
- }
-
- ## Make sure there aren't invalid characters in the address, and return it.
- my $ctrl = '\000-\037';
- my $nonASCII = '\x80-\xff';
- if ($address =~ /[<> ,;:"'\[\]\\$ctrl$nonASCII]/) {
- printmsg("WARNING => The address [$address] seems to contain invalid characters: continuing anyway", 0);
- }
- return($name, $address);
-}
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-###############################################################################################
-## Function: base64_encode(string $data, bool $chunk)
-##
-## Description: Returns $data as a base64 encoded string.
-## If $chunk is true, the encoded data is returned in 76 character long lines
-## with the final \CR\LF removed.
-##
-## Note: This is only used from the smtp auth section of code.
-## At some point it would be nice to merge the code that encodes attachments and this.
-###############################################################################################
-sub base64_encode {
- my $data = $_[0];
- my $chunk = $_[1];
- my $tmp = '';
- my $base64 = '';
- my $CRLF = "\r\n";
-
- ###################################
- ## Convert binary data to base64 ##
- ###################################
- while ($data =~ s/(.{45})//s) { ## Get 45 bytes from the binary string
- $tmp = substr(pack('u', $&), 1); ## Convert the binary to uuencoded text
- chop($tmp);
- $tmp =~ tr|` -_|AA-Za-z0-9+/|; ## Translate from uuencode to base64
- $base64 .= $tmp;
- }
-
- ##########################
- ## Encode the leftovers ##
- ##########################
- my $padding = "";
- if ( ($data) and (length($data) > 0) ) {
- $padding = (3 - length($data) % 3) % 3; ## Set flag if binary data isn't divisible by 3
- $tmp = substr(pack('u', $data), 1); ## Convert the binary to uuencoded text
- chop($tmp);
- $tmp =~ tr|` -_|AA-Za-z0-9+/|; ## Translate from uuencode to base64
- $base64 .= $tmp;
- }
-
- ############################
- ## Fix padding at the end ##
- ############################
- $data = '';
- $base64 =~ s/.{$padding}$/'=' x $padding/e if $padding; ## Fix the end padding if flag (from above) is set
- if ($chunk) {
- while ($base64 =~ s/(.{1,76})//s) { ## Put $CRLF after each 76 characters
- $data .= "$1$CRLF";
- }
- }
- else {
- $data = $base64;
- }
-
- ## Remove any trailing CRLF's
- $data =~ s/(\r|\n)*$//s;
- return($data);
-}
-
-
-
-
-
-
-
-
-
-#########################################################
-# SUB: send_attachment("/path/filename")
-# Sends the mime headers and base64 encoded file
-# to the email server.
-#########################################################
-sub send_attachment {
- my ($filename) = @_; ## Get filename passed
- my (@fields, $y, $filename_name, $encoding, ## Local variables
- @attachlines, $content_type);
- my $bin = 1;
-
- @fields = split(/\/|\\/, $filename); ## Get the actual filename without the path
- $filename_name = pop(@fields);
- push @attachments_names, $filename_name; ## FIXME: This is only used later for putting in the log file
-
- ##########################
- ## Autodetect Mime Type ##
- ##########################
-
- @fields = split(/\./, $filename_name);
- $encoding = $fields[$#fields];
-
- if ($encoding =~ /txt|text|log|conf|^c$|cpp|^h$|inc|m3u/i) { $content_type = 'text/plain'; }
- elsif ($encoding =~ /html|htm|shtml|shtm|asp|php|cfm/i) { $content_type = 'text/html'; }
- elsif ($encoding =~ /sh$/i) { $content_type = 'application/x-sh'; }
- elsif ($encoding =~ /tcl/i) { $content_type = 'application/x-tcl'; }
- elsif ($encoding =~ /pl$/i) { $content_type = 'application/x-perl'; }
- elsif ($encoding =~ /js$/i) { $content_type = 'application/x-javascript'; }
- elsif ($encoding =~ /man/i) { $content_type = 'application/x-troff-man'; }
- elsif ($encoding =~ /gif/i) { $content_type = 'image/gif'; }
- elsif ($encoding =~ /jpg|jpeg|jpe|jfif|pjpeg|pjp/i) { $content_type = 'image/jpeg'; }
- elsif ($encoding =~ /tif|tiff/i) { $content_type = 'image/tiff'; }
- elsif ($encoding =~ /xpm/i) { $content_type = 'image/x-xpixmap'; }
- elsif ($encoding =~ /bmp/i) { $content_type = 'image/x-MS-bmp'; }
- elsif ($encoding =~ /pcd/i) { $content_type = 'image/x-photo-cd'; }
- elsif ($encoding =~ /png/i) { $content_type = 'image/png'; }
- elsif ($encoding =~ /aif|aiff/i) { $content_type = 'audio/x-aiff'; }
- elsif ($encoding =~ /wav/i) { $content_type = 'audio/x-wav'; }
- elsif ($encoding =~ /mp2|mp3|mpa/i) { $content_type = 'audio/x-mpeg'; }
- elsif ($encoding =~ /ra$|ram/i) { $content_type = 'audio/x-pn-realaudio'; }
- elsif ($encoding =~ /mpeg|mpg/i) { $content_type = 'video/mpeg'; }
- elsif ($encoding =~ /mov|qt$/i) { $content_type = 'video/quicktime'; }
- elsif ($encoding =~ /avi/i) { $content_type = 'video/x-msvideo'; }
- elsif ($encoding =~ /zip/i) { $content_type = 'application/x-zip-compressed'; }
- elsif ($encoding =~ /tar/i) { $content_type = 'application/x-tar'; }
- elsif ($encoding =~ /jar/i) { $content_type = 'application/java-archive'; }
- elsif ($encoding =~ /exe|bin/i) { $content_type = 'application/octet-stream'; }
- elsif ($encoding =~ /ppt|pot|ppa|pps|pwz/i) { $content_type = 'application/vnd.ms-powerpoint'; }
- elsif ($encoding =~ /mdb|mda|mde/i) { $content_type = 'application/vnd.ms-access'; }
- elsif ($encoding =~ /xls|xlt|xlm|xld|xla|xlc|xlw|xll/i) { $content_type = 'application/vnd.ms-excel'; }
- elsif ($encoding =~ /doc|dot/i) { $content_type = 'application/msword'; }
- elsif ($encoding =~ /rtf/i) { $content_type = 'application/rtf'; }
- elsif ($encoding =~ /pdf/i) { $content_type = 'application/pdf'; }
- elsif ($encoding =~ /tex/i) { $content_type = 'application/x-tex'; }
- elsif ($encoding =~ /latex/i) { $content_type = 'application/x-latex'; }
- elsif ($encoding =~ /vcf/i) { $content_type = 'application/x-vcard'; }
- else { $content_type = 'application/octet-stream'; }
-
-
- ############################
- ## Process the attachment ##
- ############################
-
- #####################################
- ## Generate and print MIME headers ##
- #####################################
-
- $y = "$CRLF--$conf{'delimiter'}$CRLF";
- $y .= "Content-Type: $content_type;$CRLF";
- $y .= " name=\"$filename_name\"$CRLF";
- $y .= "Content-Transfer-Encoding: base64$CRLF";
- $y .= "Content-Disposition: attachment; filename=\"$filename_name\"$CRLF";
- $y .= "$CRLF";
- print $SERVER $y;
-
-
- ###########################################################
- ## Convert the file to base64 and print it to the server ##
- ###########################################################
-
- open (FILETOATTACH, $filename) || do {
- printmsg("ERROR => Opening the file [$filename] for attachment failed with the error: $!", 0);
- return(1);
- };
- binmode(FILETOATTACH); ## Hack to make Win32 work
-
- my $res = "";
- my $tmp = "";
- my $base64 = "";
- while (<FILETOATTACH>) { ## Read a line from the (binary) file
- $res .= $_;
-
- ###################################
- ## Convert binary data to base64 ##
- ###################################
- while ($res =~ s/(.{45})//s) { ## Get 45 bytes from the binary string
- $tmp = substr(pack('u', $&), 1); ## Convert the binary to uuencoded text
- chop($tmp);
- $tmp =~ tr|` -_|AA-Za-z0-9+/|; ## Translate from uuencode to base64
- $base64 .= $tmp;
- }
-
- ################################
- ## Print chunks to the server ##
- ################################
- while ($base64 =~ s/(.{76})//s) {
- print $SERVER "$1$CRLF";
- }
-
- }
-
- ###################################
- ## Encode and send the leftovers ##
- ###################################
- my $padding = "";
- if ( ($res) and (length($res) >= 1) ) {
- $padding = (3 - length($res) % 3) % 3; ## Set flag if binary data isn't divisible by 3
- $res = substr(pack('u', $res), 1); ## Convert the binary to uuencoded text
- chop($res);
- $res =~ tr|` -_|AA-Za-z0-9+/|; ## Translate from uuencode to base64
- }
-
- ############################
- ## Fix padding at the end ##
- ############################
- $res = $base64 . $res; ## Get left overs from above
- $res =~ s/.{$padding}$/'=' x $padding/e if $padding; ## Fix the end padding if flag (from above) is set
- if ($res) {
- while ($res =~ s/(.{1,76})//s) { ## Send it to the email server.
- print $SERVER "$1$CRLF";
- }
- }
-
- close (FILETOATTACH) || do {
- printmsg("ERROR - Closing the filehandle for file [$filename] failed with the error: $!", 0);
- return(2);
- };
-
- ## Return 0 errors
- return(0);
-
-}
-
-
-
-
-
-
-
-
-
-###############################################################################################
-## Function: $string = get_hostname (boot $fqdn)
-##
-## Description: Tries really hard to returns the short (or FQDN) hostname of the current
-## system. Uses techniques and code from the Sys-Hostname module.
-##
-## Input: $fqdn A true value (1) will cause this function to return a FQDN hostname
-## rather than a short hostname.
-##
-## Output: Returns a string
-###############################################################################################
-sub get_hostname {
- ## Assign incoming parameters to variables
- my ( $fqdn ) = @_;
- my $hostname = "";
-
- ## STEP 1: Get short hostname
-
- ## Load Sys::Hostname if it's available
- eval { require Sys::Hostname; };
- unless ($@) {
- $hostname = Sys::Hostname::hostname();
- }
-
- ## If that didn't get us a hostname, try a few other things
- else {
- ## Windows systems
- if ($^O !~ /win/i) {
- if ($ENV{'COMPUTERNAME'}) { $hostname = $ENV{'COMPUTERNAME'}; }
- if (!$hostname) { $hostname = gethostbyname('localhost'); }
- if (!$hostname) { chomp($hostname = `hostname 2> NUL`) };
- }
-
- ## Unix systems
- else {
- local $ENV{PATH} = '/usr/bin:/bin:/usr/sbin:/sbin'; ## Paranoia
-
- ## Try the environment first (Help! What other variables could/should I be checking here?)
- if ($ENV{'HOSTNAME'}) { $hostname = $ENV{'HOSTNAME'}; }
-
- ## Try the hostname command
- eval { local $SIG{__DIE__}; local $SIG{CHLD}; $hostname = `hostname 2>/dev/null`; chomp($hostname); } ||
-
- ## Try POSIX::uname(), which strictly can't be expected to be correct
- eval { local $SIG{__DIE__}; require POSIX; $hostname = (POSIX::uname())[1]; } ||
-
- ## Try the uname command
- eval { local $SIG{__DIE__}; $hostname = `uname -n 2>/dev/null`; chomp($hostname); };
-
- }
-
- ## If we can't find anything else, return ""
- if (!$hostname) {
- print "WARNING => No hostname could be determined, please specify one with -o fqdn=FQDN option!\n";
- return("unknown");
- }
- }
-
- ## Return the short hostname
- unless ($fqdn) {
- $hostname =~ s/\..*//;
- return(lc($hostname));
- }
-
- ## STEP 2: Determine the FQDN
-
- ## First, if we already have one return it.
- if ($hostname =~ /\w\.\w/) { return(lc($hostname)); }
-
- ## Next try using
- eval { $fqdn = (gethostbyname($hostname))[0]; };
- if ($fqdn) { return(lc($fqdn)); }
- return(lc($hostname));
-}
-
-
-
-
-
-
-
-
-###############################################################################################
-## Function: printmsg (string $message, int $level)
-##
-## Description: Handles all messages - printing them to the screen only if the messages
-## $level is >= the global debug level. If $conf{'logFile'} is defined it
-## will also log the message to that file.
-##
-## Input: $message A message to be printed, logged, etc.
-## $level The debug level of the message. If
-## not defined 0 will be assumed. 0 is
-## considered a normal message, 1 and
-## higher is considered a debug message.
-##
-## Output: Prints to STDOUT
-##
-## Assumptions: $conf{'hostname'} should be the name of the computer we're running on.
-## $conf{'stdout'} should be set to 1 if you want to print to stdout
-## $conf{'logFile'} should be a full path to a log file if you want that
-## $conf{'debug'} should be an integer between 0 and 10.
-##
-## Example: printmsg("WARNING: We believe in generic error messages... NOT!", 0);
-###############################################################################################
-sub printmsg {
- ## Assign incoming parameters to variables
- my ( $message, $level ) = @_;
-
- ## Make sure input is sane
- $level = 0 if (!defined($level));
- $message =~ s/\s+$//sgo;
- $message =~ s/\r?\n/, /sgo;
-
- ## Continue only if the debug level of the program is >= message debug level.
- if ($conf{'debug'} >= $level) {
-
- ## Get the date in the format: Dec 3 11:14:04
- my ($sec, $min, $hour, $mday, $mon) = localtime();
- $mon = ('Jan', 'Feb', 'Mar', 'Apr', 'May', 'Jun', 'Jul', 'Aug', 'Sep', 'Oct', 'Nov', 'Dec')[$mon];
- my $date = sprintf("%s %02d %02d:%02d:%02d", $mon, $mday, $hour, $min, $sec);
-
- ## Print to STDOUT always if debugging is enabled, or if conf{stdout} is true.
- if ( ($conf{'debug'} >= 1) or ($conf{'stdout'} == 1) ) {
- print "$date $conf{'hostname'} $conf{'programName'}\[$$\]: $message\n";
- }
-
- ## Print to the log file if $conf{'logging'} is true
- if ($conf{'logFile'}) {
- if (openLogFile($conf{'logFile'})) { $conf{'logFile'} = ""; printmsg("ERROR => Opening the file [$conf{'logFile'}] for appending returned the error: $!", 1); }
- print LOGFILE "$date $conf{'hostname'} $conf{'programName'}\[$$\]: $message\n";
- }
-
- }
-
- ## Return 0 errors
- return(0);
-}
-
-
-
-
-
-
-
-
-
-
-
-
-###############################################################################################
-## FUNCTION:
-## openLogFile ( $filename )
-##
-##
-## DESCRIPTION:
-## Opens the file $filename and attaches it to the filehandle "LOGFILE". Returns 0 on success
-## and non-zero on failure. Error codes are listed below, and the error message gets set in
-## global variable $!.
-##
-##
-## Example:
-## openFile ("/var/log/sendEmail.log");
-##
-###############################################################################################
-sub openLogFile {
- ## Get the incoming filename
- my $filename = $_[0];
-
- ## Make sure our file exists, and if the file doesn't exist then create it
- if ( ! -f $filename ) {
- print STDERR "NOTICE: The log file [$filename] does not exist. Creating it now with mode [0600].\n" if ($conf{'stdout'});
- open (LOGFILE, ">>$filename");
- close LOGFILE;
- chmod (0600, $filename);
- }
-
- ## Now open the file and attach it to a filehandle
- open (LOGFILE,">>$filename") or return (1);
-
- ## Put the file into non-buffering mode
- select LOGFILE;
- $| = 1;
- select STDOUT;
-
- ## Return success
- return(0);
-}
-
-
-
-
-
-
-
-
-###############################################################################################
-## Function: read_file (string $filename)
-##
-## Description: Reads the contents of a file and returns a two part array:
-## ($status, $file-contents)
-## $status is 0 on success, non-zero on error.
-##
-## Example: ($status, $file) = read_file("/etc/passwd");
-###############################################################################################
-sub read_file {
- my ( $filename ) = @_;
-
- ## If the value specified is a file, load the file's contents
- if ( (-e $filename and -r $filename) ) {
- my $FILE;
- if(!open($FILE, ' ' . $filename)) {
- return((1, ""));
- }
- my $file = '';
- while (<$FILE>) {
- $file .= $_;
- }
- ## Strip an ending \r\n
- $file =~ s/\r?\n$//os;
- }
- return((1, ""));
-}
-
-
-
-
-
-
-
-
-
-###############################################################################################
-## Function: quit (string $message, int $errorLevel)
-##
-## Description: Exits the program, optionally printing $message. It
-## returns an exit error level of $errorLevel to the
-## system (0 means no errors, and is assumed if empty.)
-##
-## Example: quit("Exiting program normally", 0);
-###############################################################################################
-sub quit {
- my ( $message, $errorLevel ) = @_;
- $errorLevel = 0 if (!defined($errorLevel));
-
- ## Print exit message
- if ($message) {
- printmsg($message, 0);
- }
-
- ## Exit
- exit($errorLevel);
-}
-
-
-
-
-
-
-
-
-
-
-
-
-###############################################################################################
-## Function: help ()
-##
-## Description: For all those newbies ;)
-## Prints a help message and exits the program.
-##
-###############################################################################################
-sub help {
-exit(1) if (!$conf{'stdout'});
-print <<EOM;
-
-${colorBold}$conf{'programName'}-$conf{'version'} by $conf{'authorName'} <$conf{'authorEmail'}>${colorNoBold}
-
-Synopsis: $conf{'programName'} -f ADDRESS [options]
-
- ${colorRed}Required:${colorNormal}
- -f ADDRESS from (sender) email address
- * At least one recipient required via -t, -cc, or -bcc
- * Message body required via -m, STDIN, or -o message-file=FILE
-
- ${colorGreen}Common:${colorNormal}
- -t ADDRESS [ADDR ...] to email address(es)
- -u SUBJECT message subject
- -m MESSAGE message body
- -s SERVER[:PORT] smtp mail relay, default is $conf{'server'}:$conf{'port'}
-
- ${colorGreen}Optional:${colorNormal}
- -a FILE [FILE ...] file attachment(s)
- -cc ADDRESS [ADDR ...] cc email address(es)
- -bcc ADDRESS [ADDR ...] bcc email address(es)
- -xu USERNAME username for SMTP authentication
- -xp PASSWORD password for SMTP authentication
-
- ${colorGreen}Paranormal:${colorNormal}
- -b BINDADDR[:PORT] local host bind address
- -l LOGFILE log to the specified file
- -v verbosity, use multiple times for greater effect
- -q be quiet (i.e. no STDOUT output)
- -o NAME=VALUE advanced options, for details try: --help misc
- -o message-content-type=<auto|text|html>
- -o message-file=FILE -o message-format=raw
- -o message-header=HEADER -o message-charset=CHARSET
- -o reply-to=ADDRESS -o timeout=SECONDS
- -o username=USERNAME -o password=PASSWORD
- -o tls=<auto|yes|no> -o fqdn=FQDN
-
-
- ${colorGreen}Help:${colorNormal}
- --help the helpful overview you're reading now
- --help addressing explain addressing and related options
- --help message explain message body input and related options
- --help networking explain -s, -b, etc
- --help output explain logging and other output options
- --help misc explain -o options, TLS, SMTP auth, and more
-
-EOM
-exit(1);
-}
-
-
-
-
-
-
-
-
-
-###############################################################################################
-## Function: helpTopic ($topic)
-##
-## Description: For all those newbies ;)
-## Prints a help message and exits the program.
-##
-###############################################################################################
-sub helpTopic {
- exit(1) if (!$conf{'stdout'});
- my ($topic) = @_;
-
- CASE: {
-
-
-
-
-## ADDRESSING
- ($topic eq 'addressing') && do {
- print <<EOM;
-
-${colorBold}ADDRESSING DOCUMENTATION${colorNormal}
-
-${colorGreen}Addressing Options${colorNormal}
-Options related to addressing:
- -f ADDRESS
- -t ADDRESS [ADDRESS ...]
- -cc ADDRESS [ADDRESS ...]
- -bcc ADDRESS [ADDRESS ...]
- -o reply-to=ADDRESS
-
--f ADDRESS
- This required option specifies who the email is from, I.E. the sender's
- email address.
-
--t ADDRESS [ADDRESS ...]
- This option specifies the primary recipient(s). At least one recipient
- address must be specified via the -t, -cc. or -bcc options.
-
--cc ADDRESS [ADDRESS ...]
- This option specifies the "carbon copy" recipient(s). At least one
- recipient address must be specified via the -t, -cc. or -bcc options.
-
--bcc ADDRESS [ADDRESS ...]
- This option specifies the "blind carbon copy" recipient(s). At least
- one recipient address must be specified via the -t, -cc. or -bcc options.
-
--o reply-to=ADDRESS
- This option specifies that an optional "Reply-To" address should be
- written in the email's headers.
-
-
-${colorGreen}Email Address Syntax${colorNormal}
-Email addresses may be specified in one of two ways:
- Full Name: "John Doe <john.doe\@gmail.com>"
- Just Address: "john.doe\@gmail.com"
-
-The "Full Name" method is useful if you want a name, rather than a plain
-email address, to be displayed in the recipient's From, To, or Cc fields
-when they view the message.
-
-
-${colorGreen}Multiple Recipients${colorNormal}
-The -t, -cc, and -bcc options each accept multiple addresses. They may be
-specified by separating them by either a white space, comma, or semi-colon
-separated list. You may also specify the -t, -cc, and -bcc options multiple
-times, each occurance will append the new recipients to the respective list.
-
-Examples:
-(I used "-t" in these examples, but it can be "-cc" or "-bcc" as well)
-
- * Space separated list:
- -t jane.doe\@yahoo.com "John Doe <john.doe\@gmail.com>"
-
- * Semi-colon separated list:
- -t "jane.doe\@yahoo.com; John Doe <john.doe\@gmail.com>"
-
- * Comma separated list:
- -t "jane.doe\@yahoo.com, John Doe <john.doe\@gmail.com>"
-
- * Multiple -t, -cc, or -bcc options:
- -t "jane.doe\@yahoo.com" -t "John Doe <john.doe\@gmail.com>"
-
-
-EOM
- last CASE;
- };
-
-
-
-
-
-
-## MESSAGE
- ($topic eq 'message') && do {
- print <<EOM;
-
-${colorBold}MESSAGE DOCUMENTATION${colorNormal}
-
-${colorGreen}Message Options${colorNormal}
-Options related to the email message body:
- -u SUBJECT
- -m MESSAGE
- -o message-file=FILE
- -o message-content-type=<auto|text|html>
- -o message-header=EMAIL HEADER
- -o message-charset=CHARSET
- -o message-format=raw
-
--u SUBJECT
- This option allows you to specify the subject for your email message.
- It is not required (anymore) that the subject be quoted, although it
- is recommended. The subject will be read until an argument starting
- with a hyphen (-) is found.
- Examples:
- -u "Contact information while on vacation"
- -u New Microsoft vulnerability discovered
-
--m MESSAGE
- This option is one of three methods that allow you to specify the message
- body for your email. The message may be specified on the command line
- with this -m option, read from a file with the -o message-file=FILE
- option, or read from STDIN if neither of these options are present.
-
- It is not required (anymore) that the message be quoted, although it is
- recommended. The message will be read until an argument starting with a
- hyphen (-) is found.
- Examples:
- -m "See you in South Beach, Hawaii. -Todd"
- -m Please ensure that you upgrade your systems right away
-
- Multi-line message bodies may be specified with the -m option by putting
- a "\\n" into the message. Example:
- -m "This is line 1.\\nAnd this is line 2."
-
- HTML messages are supported, simply begin your message with "<html>" and
- sendEmail will properly label the mime header so MUAs properly render
- the message. It is currently not possible without "-o message-format=raw"
- to send a message with both text and html parts with sendEmail.
-
--o message-file=FILE
- This option is one of three methods that allow you to specify the message
- body for your email. To use this option simply specify a text file
- containing the body of your email message. Examples:
- -o message-file=/root/message.txt
- -o message-file="C:\\Program Files\\output.txt"
-
--o message-content-type=<auto|text|html>
- This option allows you to specify the content-type of the email. If your
- email message is an html message but is being displayed as a text message
- just add "-o message-content-type=html" to the command line to force it
- to display as an html message. This actually just changes the Content-Type:
- header. Advanced users will be happy to know that if you specify anything
- other than the three options listed above it will use that as the vaule
- for the Content-Type header.
-
--o message-header=EMAIL HEADER
- This option allows you to specify additional email headers to be included.
- To add more than one message header simply use this option on the command
- line more than once. If you specify a message header that sendEmail would
- normally generate the one you specified will be used in it's place.
- Do not use this unless you know what you are doing!
- Example:
- To scare a Microsoft Outlook user you may want to try this:
- -o message-header="X-Message-Flag: Message contains illegal content"
- Example:
- To request a read-receipt try this:
- -o message-header="Disposition-Notification-To: <user\@domain.com>"
- Example:
- To set the message priority try this:
- -o message-header="X-Priority: 1"
- Priority reference: 1=highest, 2=high, 3=normal, 4=low, 5=lowest
-
--o message-charset=CHARSET
- This option allows you to specify the character-set for the message body.
- The default is iso-8859-1.
-
--o message-format=raw
- This option instructs sendEmail to assume the message (specified with -m,
- read from STDIN, or read from the file specified in -o message-file=FILE)
- is already a *complete* email message. SendEmail will not generate any
- headers and will transmit the message as-is to the remote SMTP server.
- Due to the nature of this option the following command line options will
- be ignored when this one is used:
- -u SUBJECT
- -o message-header=EMAIL HEADER
- -o message-charset=CHARSET
- -a ATTACHMENT
-
-
-${colorGreen}The Message Body${colorNormal}
-The email message body may be specified in one of three ways:
- 1) Via the -m MESSAGE command line option.
- Example:
- -m "This is the message body"
-
- 2) By putting the message body in a file and using the -o message-file=FILE
- command line option.
- Example:
- -o message-file=/root/message.txt
-
- 3) By piping the message body to sendEmail when nither of the above command
- line options were specified.
- Example:
- grep "ERROR" /var/log/messages | sendEmail -t you\@domain.com ...
-
-If the message body begins with "<html>" then the message will be treated as
-an HTML message and the MIME headers will be written so that a HTML capable
-email client will display the message in it's HTML form.
-Any of the above methods may be used with the -o message-format=raw option
-to deliver an already complete email message.
-
-
-EOM
- last CASE;
- };
-
-
-
-
-
-
-## MISC
- ($topic eq 'misc') && do {
- print <<EOM;
-
-${colorBold}MISC DOCUMENTATION${colorNormal}
-
-${colorGreen}Misc Options${colorNormal}
-Options that don't fit anywhere else:
- -a ATTACHMENT [ATTACHMENT ...]
- -xu USERNAME
- -xp PASSWORD
- -o username=USERNAME
- -o password=PASSWORD
- -o tls=<auto|yes|no>
- -o timeout=SECONDS
- -o fqdn=FQDN
-
--a ATTACHMENT [ATTACHMENT ...]
- This option allows you to attach any number of files to your email message.
- To specify more than one attachment, simply separate each filename with a
- space. Example: -a file1.txt file2.txt file3.txt
-
--xu USERNAME
- Alias for -o username=USERNAME
-
--xp PASSWORD
- Alias for -o password=PASSWORD
-
--o username=USERNAME (synonym for -xu)
- These options allow specification of a username to be used with SMTP
- servers that require authentication. If a username is specified but a
- password is not, you will be prompted to enter one at runtime.
-
--o password=PASSWORD (synonym for -xp)
- These options allow specification of a password to be used with SMTP
- servers that require authentication. If a username is specified but a
- password is not, you will be prompted to enter one at runtime.
-
--o tls=<auto|yes|no>
- This option allows you to specify if TLS (SSL for SMTP) should be enabled
- or disabled. The default, auto, will use TLS automatically if your perl
- installation has the IO::Socket::SSL and Net::SSLeay modules available,
- and if the remote SMTP server supports TLS. To require TLS for message
- delivery set this to yes. To disable TLS support set this to no. A debug
- level of one or higher will reveal details about the status of TLS.
-
--o timeout=SECONDS
- This option sets the timeout value in seconds used for all network reads,
- writes, and a few other things.
-
--o fqdn=FQDN
- This option sets the Fully Qualified Domain Name used during the initial
- SMTP greeting. Normally this is automatically detected, but in case you
- need to manually set it for some reason or get a warning about detection
- failing, you can use this to override the default.
-
-
-EOM
- last CASE;
- };
-
-
-
-
-
-
-## NETWORKING
- ($topic eq 'networking') && do {
- print <<EOM;
-
-${colorBold}NETWORKING DOCUMENTATION${colorNormal}
-
-${colorGreen}Networking Options${colorNormal}
-Options related to networking:
- -s SERVER[:PORT]
- -b BINDADDR[:PORT]
- -o tls=<auto|yes|no>
- -o timeout=SECONDS
-
--s SERVER[:PORT]
- This option allows you to specify the SMTP server sendEmail should
- connect to to deliver your email message to. If this option is not
- specified sendEmail will try to connect to localhost:25 to deliver
- the message. THIS IS MOST LIKELY NOT WHAT YOU WANT, AND WILL LIKELY
- FAIL unless you have a email server (commonly known as an MTA) running
- on your computer!
- Typically you will need to specify your company or ISP's email server.
- For example, if you use CableOne you will need to specify:
- -s mail.cableone.net
- If you have your own email server running on port 300 you would
- probably use an option like this:
- -s myserver.mydomain.com:300
- If you're a GMail user try:
- -s smtp.gmail.com:587 -xu me\@gmail.com -xp PASSWD
-
--b BINDADDR[:PORT]
- This option allows you to specify the local IP address (and optional
- tcp port number) for sendEmail to bind to when connecting to the remote
- SMTP server. This useful for people who need to send an email from a
- specific network interface or source address and are running sendEmail on
- a firewall or other host with several network interfaces.
-
--o tls=<auto|yes|no>
- This option allows you to specify if TLS (SSL for SMTP) should be enabled
- or disabled. The default, auto, will use TLS automatically if your perl
- installation has the IO::Socket::SSL and Net::SSLeay modules available,
- and if the remote SMTP server supports TLS. To require TLS for message
- delivery set this to yes. To disable TLS support set this to no. A debug
- level of one or higher will reveal details about the status of TLS.
-
--o timeout=SECONDS
- This option sets the timeout value in seconds used for all network reads,
- writes, and a few other things.
-
-
-EOM
- last CASE;
- };
-
-
-
-
-
-
-## OUTPUT
- ($topic eq 'output') && do {
- print <<EOM;
-
-${colorBold}OUTPUT DOCUMENTATION${colorNormal}
-
-${colorGreen}Output Options${colorNormal}
-Options related to output:
- -l LOGFILE
- -v
- -q
-
--l LOGFILE
- This option allows you to specify a log file to append to. Every message
- that is displayed to STDOUT is also written to the log file. This may be
- used in conjunction with -q and -v.
-
--q
- This option tells sendEmail to disable printing to STDOUT. In other
- words nothing will be printed to the console. This does not affect the
- behavior of the -l or -v options.
-
--v
- This option allows you to increase the debug level of sendEmail. You may
- either use this option more than once, or specify more than one v at a
- time to obtain a debug level higher than one. Examples:
- Specifies a debug level of 1: -v
- Specifies a debug level of 2: -vv
- Specifies a debug level of 2: -v -v
- A debug level of one is recommended when doing any sort of debugging.
- At that level you will see the entire SMTP transaction (except the
- body of the email message), and hints will be displayed for most
- warnings and errors. The highest debug level is three.
-
-
-EOM
- last CASE;
- };
-
- ## Unknown option selected!
- quit("ERROR => The help topic specified is not valid!", 1);
- };
-
-exit(1);
-}
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-#############################
-## ##
-## MAIN PROGRAM ##
-## ##
-#############################
-
-
-## Initialize
-initialize();
-
-## Process Command Line
-processCommandLine();
-$conf{'alarm'} = $opt{'timeout'};
-
-## Abort program after $conf{'alarm'} seconds to avoid infinite hangs
-alarm($conf{'alarm'}) if ($^O !~ /win/i); ## alarm() doesn't work in win32
-
-
-
-
-###################################################
-## Read $message from STDIN if -m was not used ##
-###################################################
-
-if (!($message)) {
- ## Read message body from a file specified with -o message-file=
- if ($opt{'message-file'}) {
- if (! -e $opt{'message-file'}) {
- printmsg("ERROR => Message body file specified [$opt{'message-file'}] does not exist!", 0);
- printmsg("HINT => 1) check spelling of your file; 2) fully qualify the path; 3) doubble quote it", 1);
- quit("", 1);
- }
- if (! -r $opt{'message-file'}) {
- printmsg("ERROR => Message body file specified can not be read due to restricted permissions!", 0);
- printmsg("HINT => Check permissions on file specified to ensure it can be read", 1);
- quit("", 1);
- }
- if (!open(MFILE, "< " . $opt{'message-file'})) {
- printmsg("ERROR => Error opening message body file [$opt{'message-file'}]: $!", 0);
- quit("", 1);
- }
- while (<MFILE>) {
- $message .= $_;
- }
- close(MFILE);
- }
-
- ## Read message body from STDIN
- else {
- alarm($conf{'alarm'}) if ($^O !~ /win/i); ## alarm() doesn't work in win32
- if ($conf{'stdout'}) {
- print "Reading message body from STDIN because the '-m' option was not used.\n";
- print "If you are manually typing in a message:\n";
- print " - First line must be received within $conf{'alarm'} seconds.\n" if ($^O !~ /win/i);
- print " - End manual input with a CTRL-D on its own line.\n\n" if ($^O !~ /win/i);
- print " - End manual input with a CTRL-Z on its own line.\n\n" if ($^O =~ /win/i);
- }
- while (<STDIN>) { ## Read STDIN into $message
- $message .= $_;
- alarm(0) if ($^O !~ /win/i); ## Disable the alarm since at least one line was received
- }
- printmsg("Message input complete.", 0);
- }
-}
-
-## Replace bare LF's with CRLF's (\012 should always have \015 with it)
-$message =~ s/(\015)?(\012|$)/\015\012/g;
-
-## Replace bare CR's with CRLF's (\015 should always have \012 with it)
-$message =~ s/(\015)(\012|$)?/\015\012/g;
-
-## Check message for bare periods and encode them
-$message =~ s/(^|$CRLF)(\.{1})($CRLF|$)/$1.$2$3/g;
-
-## Get the current date for the email header
-my ($sec,$min,$hour,$mday,$mon,$year,$day) = gmtime();
-$year += 1900; $mon = return_month($mon); $day = return_day($day);
-my $date = sprintf("%s, %s %s %d %.2d:%.2d:%.2d %s",$day, $mday, $mon, $year, $hour, $min, $sec, $conf{'timezone'});
-
-
-
-
-##################################
-## Connect to the SMTP server ##
-##################################
-printmsg("DEBUG => Connecting to $conf{'server'}:$conf{'port'}", 1);
-$SIG{'ALRM'} = sub {
- printmsg("ERROR => Timeout while connecting to $conf{'server'}:$conf{'port'} There was no response after $conf{'alarm'} seconds.", 0);
- printmsg("HINT => Try specifying a different mail relay with the -s option.", 1);
- quit("", 1);
-};
-alarm($conf{'alarm'}) if ($^O !~ /win/i); ## alarm() doesn't work in win32;
-$SERVER = IO::Socket::INET->new( PeerAddr => $conf{'server'},
- PeerPort => $conf{'port'},
- LocalAddr => $conf{'bindaddr'},
- Proto => 'tcp',
- Autoflush => 1,
- timeout => $conf{'alarm'},
-);
-alarm(0) if ($^O !~ /win/i); ## alarm() doesn't work in win32;
-
-## Make sure we got connected
-if ( (!$SERVER) or (!$SERVER->opened()) ) {
- printmsg("ERROR => Connection attempt to $conf{'server'}:$conf{'port'} failed: $@", 0);
- printmsg("HINT => Try specifying a different mail relay with the -s option.", 1);
- quit("", 1);
-}
-
-## Save our IP address for later
-$conf{'ip'} = $SERVER->sockhost();
-printmsg("DEBUG => My IP address is: $conf{'ip'}", 1);
-
-
-
-
-
-
-
-#########################
-## Do the SMTP Dance ##
-#########################
-
-## Read initial greeting to make sure we're talking to a live SMTP server
-if (SMTPchat()) { quit($conf{'error'}, 1); }
-
-## We're about to use $opt{'fqdn'}, make sure it isn't empty
-if (!$opt{'fqdn'}) {
- ## Ok, that means we couldn't get a hostname, how about using the IP address for the HELO instead
- $opt{'fqdn'} = "[" . $conf{'ip'} . "]";
-}
-
-## EHLO
-if (SMTPchat('EHLO ' . $opt{'fqdn'})) {
- printmsg($conf{'error'}, 0);
- printmsg("NOTICE => EHLO command failed, attempting HELO instead");
- if (SMTPchat('HELO ' . $opt{'fqdn'})) { quit($conf{'error'}, 1); }
- if ( $opt{'username'} and $opt{'password'} ) {
- printmsg("WARNING => The mail server does not support SMTP authentication!", 0);
- }
-}
-else {
-
- ## Determin if the server supports TLS
- if ($conf{'SMTPchat_response'} =~ /STARTTLS/) {
- $conf{'tls_server'} = 1;
- printmsg("DEBUG => The remote SMTP server supports TLS :)", 2);
- }
- else {
- $conf{'tls_server'} = 0;
- printmsg("DEBUG => The remote SMTP server does NOT support TLS :(", 2);
- }
-
- ## Start TLS if possible
- if ($conf{'tls_server'} == 1 and $conf{'tls_client'} == 1 and $opt{'tls'} =~ /^(yes|auto)$/) {
- printmsg("DEBUG => Starting TLS", 2);
- if (SMTPchat('STARTTLS')) { quit($conf{'error'}, 1); }
- if (! IO::Socket::SSL->start_SSL($SERVER, SSL_version => 'SSLv23:!SSLv3:!SSLv2', , SSL_verify_mode => 0)) {
- quit("ERROR => TLS setup failed: " . IO::Socket::SSL::errstr(), 1);
- }
- printmsg("DEBUG => TLS: Using cipher: ". $SERVER->get_cipher(), 3);
- printmsg("DEBUG => TLS session initialized :)", 1);
-
- ## Restart our SMTP session
- if (SMTPchat('EHLO ' . $opt{'fqdn'})) { quit($conf{'error'}, 1); }
- }
- elsif ($opt{'tls'} eq 'yes' and $conf{'tls_server'} == 0) {
- quit("ERROR => TLS not possible! Remote SMTP server, $conf{'server'}, does not support it.", 1);
- }
-
-
- ## Do SMTP Auth if required
- if ( $opt{'username'} and $opt{'password'} ) {
- if ($conf{'SMTPchat_response'} !~ /AUTH\s/) {
- printmsg("NOTICE => Authentication not supported by the remote SMTP server!", 0);
- }
- else {
- my $auth_succeeded = 0;
- my $mutual_method = 0;
-
- # ## SASL CRAM-MD5 authentication method
- # if ($conf{'SMTPchat_response'} =~ /\bCRAM-MD5\b/i) {
- # printmsg("DEBUG => SMTP-AUTH: Using CRAM-MD5 authentication method", 1);
- # if (SMTPchat('AUTH CRAM-MD5')) { quit($conf{'error'}, 1); }
- #
- # ## FIXME!!
- #
- # printmsg("DEBUG => User authentication was successful", 1);
- # }
-
- ## SASL LOGIN authentication method
- if ($auth_succeeded == 0 and $conf{'SMTPchat_response'} =~ /\bLOGIN\b/i) {
- $mutual_method = 1;
- printmsg("DEBUG => SMTP-AUTH: Using LOGIN authentication method", 1);
- if (!SMTPchat('AUTH LOGIN')) {
- if (!SMTPchat(base64_encode($opt{'username'}))) {
- if (!SMTPchat(base64_encode($opt{'password'}))) {
- $auth_succeeded = 1;
- printmsg("DEBUG => User authentication was successful (Method: LOGIN)", 1);
- }
- }
- }
- if ($auth_succeeded == 0) {
- printmsg("DEBUG => SMTP-AUTH: LOGIN authenticaion failed.", 1);
- }
- }
-
- ## SASL PLAIN authentication method
- if ($auth_succeeded == 0 and $conf{'SMTPchat_response'} =~ /\bPLAIN\b/i) {
- $mutual_method = 1;
- printmsg("DEBUG => SMTP-AUTH: Using PLAIN authentication method", 1);
- if (SMTPchat('AUTH PLAIN ' . base64_encode("$opt{'username'}\0$opt{'username'}\0$opt{'password'}"))) {
- printmsg("DEBUG => SMTP-AUTH: PLAIN authenticaion failed.", 1);
- }
- else {
- $auth_succeeded = 1;
- printmsg("DEBUG => User authentication was successful (Method: PLAIN)", 1);
- }
- }
-
- ## If none of the authentication methods supported by sendEmail were supported by the server, let the user know
- if ($mutual_method == 0) {
- printmsg("WARNING => SMTP-AUTH: No mutually supported authentication methods available", 0);
- }
-
- ## If we didn't get authenticated, log an error message and exit
- if ($auth_succeeded == 0) {
- quit("ERROR => ERROR => SMTP-AUTH: Authentication to $conf{'server'}:$conf{'port'} failed.", 1);
- }
- }
- }
-}
-
-## MAIL FROM
-if (SMTPchat('MAIL FROM:<' .(returnAddressParts($from))[1]. '>')) { quit($conf{'error'}, 1); }
-
-## RCPT TO
-my $oneRcptAccepted = 0;
-foreach my $rcpt (@to, @cc, @bcc) {
- my ($name, $address) = returnAddressParts($rcpt);
- if (SMTPchat('RCPT TO:<' . $address . '>')) {
- printmsg("WARNING => The recipient <$address> was rejected by the mail server, error follows:", 0);
- $conf{'error'} =~ s/^ERROR/WARNING/o;
- printmsg($conf{'error'}, 0);
- }
- elsif ($oneRcptAccepted == 0) {
- $oneRcptAccepted = 1;
- }
-}
-## If no recipients were accepted we need to exit with an error.
-if ($oneRcptAccepted == 0) {
- quit("ERROR => Exiting. No recipients were accepted for delivery by the mail server.", 1);
-}
-
-## DATA
-if (SMTPchat('DATA')) { quit($conf{'error'}, 1); }
-
-
-###############################
-## Build and send the body ##
-###############################
-printmsg("INFO => Sending message body",1);
-
-## If the message-format is raw just send the message as-is.
-if ($opt{'message-format'} =~ /^raw$/i) {
- print $SERVER $message;
-}
-
-## If the message-format isn't raw, then build and send the message,
-else {
-
- ## Message-ID: <MessageID>
- if ($opt{'message-header'} !~ /^Message-ID:/iom) {
- $header .= 'Message-ID: <' . $conf{'Message-ID'} . '@' . $conf{'hostname'} . '>' . $CRLF;
- }
-
- ## From: "Name" <address@domain.com> (the pointless test below is just to keep scoping correct)
- if ($from and $opt{'message-header'} !~ /^From:/iom) {
- my ($name, $address) = returnAddressParts($from);
- $header .= 'From: "' . $name . '" <' . $address . '>' . $CRLF;
- }
-
- ## Reply-To:
- if ($opt{'reply-to'} and $opt{'message-header'} !~ /^Reply-To:/iom) {
- my ($name, $address) = returnAddressParts($opt{'reply-to'});
- $header .= 'Reply-To: "' . $name . '" <' . $address . '>' . $CRLF;
- }
-
- ## To: "Name" <address@domain.com>
- if ($opt{'message-header'} =~ /^To:/iom) {
- ## The user put the To: header in via -o message-header - dont do anything
- }
- elsif (scalar(@to) > 0) {
- $header .= "To:";
- for (my $a = 0; $a < scalar(@to); $a++) {
- my $msg = "";
-
- my ($name, $address) = returnAddressParts($to[$a]);
- $msg = " \"$name\" <$address>";
-
- ## If we're not on the last address add a comma to the end of the line.
- if (($a + 1) != scalar(@to)) {
- $msg .= ",";
- }
-
- $header .= $msg . $CRLF;
- }
- }
- ## We always want a To: line so if the only recipients were bcc'd they don't see who it was sent to
- else {
- $header .= "To: \"Undisclosed Recipients\" <>$CRLF";
- }
-
- if (scalar(@cc) > 0 and $opt{'message-header'} !~ /^Cc:/iom) {
- $header .= "Cc:";
- for (my $a = 0; $a < scalar(@cc); $a++) {
- my $msg = "";
-
- my ($name, $address) = returnAddressParts($cc[$a]);
- $msg = " \"$name\" <$address>";
-
- ## If we're not on the last address add a comma to the end of the line.
- if (($a + 1) != scalar(@cc)) {
- $msg .= ",";
- }
-
- $header .= $msg . $CRLF;
- }
- }
-
- if ($opt{'message-header'} !~ /^Subject:/iom) {
- $header .= 'Subject: ' . $subject . $CRLF; ## Subject
- }
- if ($opt{'message-header'} !~ /^Date:/iom) {
- $header .= 'Date: ' . $date . $CRLF; ## Date
- }
- if ($opt{'message-header'} !~ /^X-Mailer:/iom) {
- $header .= 'X-Mailer: sendEmail-'.$conf{'version'}.$CRLF; ## X-Mailer
- }
- ## I wonder if I should put this in by default?
- # if ($opt{'message-header'} !~ /^X-Originating-IP:/iom) {
- # $header .= 'X-Originating-IP: ['.$conf{'ip'}.']'.$CRLF; ## X-Originating-IP
- # }
-
- ## Encode all messages with MIME.
- if ($opt{'message-header'} !~ /^MIME-Version:/iom) {
- $header .= "MIME-Version: 1.0$CRLF";
- }
- if ($opt{'message-header'} !~ /^Content-Type:/iom) {
- my $content_type = 'multipart/mixed';
- if (scalar(@attachments) == 0) { $content_type = 'multipart/related'; }
- $header .= "Content-Type: $content_type; boundary=\"$conf{'delimiter'}\"$CRLF";
- }
-
- ## Send additional message header line(s) if specified
- if ($opt{'message-header'}) {
- $header .= $opt{'message-header'};
- }
-
- ## Send the message header to the server
- print $SERVER $header . $CRLF;
-
- ## Start sending the message body to the server
- print $SERVER "This is a multi-part message in MIME format. To properly display this message you need a MIME-Version 1.0 compliant Email program.$CRLF";
- print $SERVER "$CRLF";
-
-
- ## Send message body
- print $SERVER "--$conf{'delimiter'}$CRLF";
- ## Send a message content-type header:
- ## If the message contains HTML...
- if ($opt{'message-content-type'} eq 'html' or ($opt{'message-content-type'} eq 'auto' and $message =~ /^\s*(<HTML|<!DOCTYPE)/i) ) {
- printmsg("Setting content-type: text/html", 1);
- print $SERVER "Content-Type: text/html;$CRLF";
- }
- ## Otherwise assume it's plain text...
- elsif ($opt{'message-content-type'} eq 'text' or $opt{'message-content-type'} eq 'auto') {
- printmsg("Setting content-type: text/plain", 1);
- print $SERVER "Content-Type: text/plain;$CRLF";
- }
- ## If they've specified their own content-type string...
- else {
- printmsg("Setting custom content-type: ".$opt{'message-content-type'}, 1);
- print $SERVER "Content-Type: ".$opt{'message-content-type'}.";$CRLF";
- }
- print $SERVER " charset=\"" . $opt{'message-charset'} . "\"$CRLF";
- print $SERVER "Content-Transfer-Encoding: 7bit$CRLF";
- print $SERVER $CRLF . $message;
-
-
-
- ## Send Attachemnts
- if (scalar(@attachments) > 0) {
- ## Disable the alarm so people on modems can send big attachments
- alarm(0) if ($^O !~ /win/i); ## alarm() doesn't work in win32
-
- ## Send the attachments
- foreach my $filename (@attachments) {
- ## This is check 2, we already checked this above, but just in case...
- if ( ! -f $filename ) {
- printmsg("ERROR => The file [$filename] doesn't exist! Email will be sent, but without that attachment.", 0);
- }
- elsif ( ! -r $filename ) {
- printmsg("ERROR => Couldn't open the file [$filename] for reading: $! Email will be sent, but without that attachment.", 0);
- }
- else {
- printmsg("DEBUG => Sending the attachment [$filename]", 1);
- send_attachment($filename);
- }
- }
- }
-
-
- ## End the mime encoded message
- print $SERVER "$CRLF--$conf{'delimiter'}--$CRLF";
-}
-
-
-## Tell the server we are done sending the email
-print $SERVER "$CRLF.$CRLF";
-if (SMTPchat()) { quit($conf{'error'}, 1); }
-
-
-
-####################
-# We are done!!! #
-####################
-
-## Disconnect from the server (don't SMTPchat(), it breaks when using TLS)
-print $SERVER "QUIT$CRLF";
-close $SERVER;
-
-
-
-
-
-
-#######################################
-## Generate exit message/log entry ##
-#######################################
-
-if ($conf{'debug'} or $conf{'logging'}) {
- printmsg("Generating a detailed exit message", 3);
-
- ## Put the message together
- my $output = "Email was sent successfully! From: <" . (returnAddressParts($from))[1] . "> ";
-
- if (scalar(@to) > 0) {
- $output .= "To: ";
- for ($a = 0; $a < scalar(@to); $a++) {
- $output .= "<" . (returnAddressParts($to[$a]))[1] . "> ";
- }
- }
- if (scalar(@cc) > 0) {
- $output .= "Cc: ";
- for ($a = 0; $a < scalar(@cc); $a++) {
- $output .= "<" . (returnAddressParts($cc[$a]))[1] . "> ";
- }
- }
- if (scalar(@bcc) > 0) {
- $output .= "Bcc: ";
- for ($a = 0; $a < scalar(@bcc); $a++) {
- $output .= "<" . (returnAddressParts($bcc[$a]))[1] . "> ";
- }
- }
- $output .= "Subject: [$subject] " if ($subject);
- if (scalar(@attachments_names) > 0) {
- $output .= "Attachment(s): ";
- foreach(@attachments_names) {
- $output .= "[$_] ";
- }
- }
- $output .= "Server: [$conf{'server'}:$conf{'port'}]";
-
-
-######################
-# Exit the program #
-######################
-
- ## Print / Log the detailed message
- quit($output, 0);
-}
-else {
- ## Or the standard message
- quit("Email was sent successfully!", 0);
-}
-
projects / juridig_lu.git / commitdiff
